Address
0x02
Description
The EN_RX_ADDR register is used to enable or disable the six Rx pipes.
Contents
This table is copied from the nRF24L01 product specification (page 53).
Name |
Bit |
Reset Value |
Type | Description |
Reserved | 7 | 0 | R/W | Only ‘0’ allowed |
Reserved | 6 | 0 | R/W | Only ‘0’ allowed |
ERX_P5 | 5 | 0 | R/W | Enable data pipe 5. |
ERX_P4 | 4 | 0 | R/W | Enable data pipe 4. |
ERX_P3 | 3 | 0 | R/W | Enable data pipe 3. |
ERX_P2 | 2 | 0 | R/W | Enable data pipe 2. |
ERX_P1 | 1 | 1 | R/W | Enable data pipe 1. |
ERX_P0 | 0 | 1 | R/W | Enable data pipe 0. |
Comments
Pipes 0 and 1 are enabled by default; the rest are disabled.