Tag Archives: 123D

Underwater Solenoid Valve Remake

I tried a solenoid I scavenged from underwater valves on my 3D printed valve system and it didn’t work (duh).  It was just too weak.  The original valve spreads the force from the high-pressure side across a larger area, so I guess the spring return can be comparatively weak.  My design didn’t do that.  I also didn’t cut my compression spring down very much, but I qualitatively determined that the solenoid wasn’t generating a useful amount of force by holding it on the magnetic core while turning the power on and off a bunch of times.  I am a terrible engineer.

So I went back to square 2 and decided to remake the original brass valve body in lighter ABS plastic using our Makerbot 3D printer.  The beta version looked like this: Continue reading →

What I learnt making a 3D printable AUV hull (Part 2)

I printed four copies of the semidemihemisphere and refined it a bit as I went.  Here’s the whole thing, including the hull that I covered in my last log entry.  The only difference in the hull is I removed the top hole, as only two of the semidemihemispheres need it (as valve mounting holes).

Tweaked version of the AUV model.

Tweaked version of the AUV model.

I made a few interesting changes to the cutaway portion though:

Continue reading →

What I learnt making a 3D printable AUV hull (Part 1)

I did a bit of testing on my AUV hull design, and finally got a prototype ready to go.  I’ve been working on the design for several months in Autodesk 123d, which is a pretty great program if you can put up with the crashes, corrupt save files, and slowness (hey, it’s beta).

Here is my current design in full, including the support structures:

Spherical Autonomous Underwater Vehicle hull

The 3D model for my spherical AUV hull.

This is one eighth of the hull; I call it a semidemihemisphere.  Eight of these will make a sphere 18 cm in diameter.  I split it up into eighths because I’m using a Makerbot 3D printer and its build platform is limited to a cube about 10 cm to a side.  Also, this way each piece can be identical (or nearly so).

One limitation in the Makerbot is that it can’t print overhangs very well, so I had to add some support structures that can be cut away.  In this entry I will ignore that and focus on the hull design:

Continue reading →

Sure enough, ReplicatorG reads 123D-generated STL files at 1/10 scale

Update: 123D beta 5 uses the proper units for exporting STL files, so the scaling operation is no longer necessary.

As I noted previously, objects in STL files created by Autodesk’s new 123D CAD program are not correctly scaled when loaded into ReplicatorG (at least not for me, I’m using the public beta from a few weeks ago).  Eyeballing it, I guessed the object in RepG was about 1/10 the size defined in the 123D model.

To test this hypothesis, I designed a rectangular prism, 50 mm by 25 mm by 10 mm (yes, the temptation to go 90x40x10 was strong).  Results follow:

Continue reading →

Forget the title of that last post: developing an AUV hull in 123D

I’m working on a prototype for the AUV hull.  I plan to print a 10 cm diameter hollowish sphere and use it to develop a buoyancy system.

It’s not easy to print a large sphere on a Makerbot.  There are a lot of cool sphere things on Thingiverse, including some pretty sweet hollow sphere patterns.  That hollow sphere is allegedly printable on a Makerbot, but I’m not sure it’s the best option for my AUV.

I’m working on a design for a self-supporting hemisphere in Autodesk’s new 123D CAD program.

Continue reading →